Browse by Manufacturer

# Product Code Quantity
1
2
3
4
5

Honeywell

Honeywell
Honeywell
Multitrend SX

The TVMUSX Multitrend Electronic Data Recorder represents the latest in displaying and recording process data electronically. The Multitrend SX uses a 12.1 inch digital color LCD display and fits the standard cutout used by 180 mm [7.0 in] strip chart paper recorders. It provides such advance features as custom screen design, allowing the...

Honeywell
Optima Plus

As part of the Honeywell Analytics group, Sieger continues to develop advanced and innovative sensing technology, to create highly reliable, fit for purpose, cost effective gas detection solutions for the most demanding of environments.

Experience in the design, manufacture, installation and maintenance of point infrared gas...

Honeywell
PowerPro DP-Series
2 Pole

These electromagnetically-operated Definite Purpose Contactors provide switching for starting induction motors.

Honeywell
PowerPro DP-Series
3 Pole

These three pole definite purpose electromagnetically operated contactors provide switching for starting of induction motors.

Honeywell
PowerPro DP-Series
4 Pole

Definite purpose four (40A) pole contactors provide switching for across-the-line starting of induction motors.

Honeywell
S8610U

Field service replacement for most Honeywell, Robertshaw, Johnson, and UTEC (HSC) Intermittent Pilot Ignition Modules. Provides electronic control of most intermittent pilot ignition systems used on gas-fired furnaces, boilers, and other heating appliances.

Honeywell
S8910

Universal Hot Surface Ignition Module is designed to provide easy field replacement of a wide range of hot surface ignition modules manufactured by Honeywell, Robertshaw and White-Rodgers. The S8910U Module provides operating control of a direct ignition system using a 120 Vac hot surface igniter.

Honeywell
STA700
STA700 and STA70L

Honeywell Technology

Part of the SmartLine® family of products, the STA700 and STA70L are suitable for monitoring, control and data acquisition. STA70X products feature piezoresistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy, stability...

Honeywell
STA800
STA800 and STA80L

Part of the SmartLine® family of products, the STA800 and STA80L are high performance absolute pressure transmitters featuring piezoresistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy, stability and performance over a wide range of application pressures and...

Honeywell
STD700
STD700

Honeywell Technology

Part of the SmartLine® family of products, the STD700 is suitable for monitoring, control and data acquisition STD700 products feature piezoresistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy,...

Honeywell
STD800
STD800

Honeywell Technology

Part of the SmartLine® family of products, the STD800 is a high performance differential pressure transmitter featuring piezoresistive sensor technology. By combining differential pressure sensing with on chip static and temperature compensation the STD800 offers high...

Honeywell
STG700
STG700 and STG70L

Honeywell Technology

Part of the SmartLine® family of products, the STG700 and STG70L are suitable for monitoring, control and data acquisition. STG70X products feature piezoresistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy, stability...

Honeywell
STG800
STG800 and STG80L

Honeywell Technology

Part of the SmartLine® family of products, the STG800 and STG80L are high performance gauge pressure transmitter featuring piezoresistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy, stability and performance over a wide...

Honeywell
UDC2500

The UDC2500 Universal Digital Controller is a new, low-priced addition to Honeywell’s Controller family. This controller introduces new features in the popular low priced ¼ DIN size while retaining all the reliability, cost effectiveness, simplicity, and popular HMI of Honeywell’s UDC 2300. The UDC2500 monitors and controls...

Honeywell
UDC3200

New Power and Flexibility The UDC3200 Universal Digital Controller packs new powerful features in the popular 1/4 DIN size. Unmatched application power includes: Infrared (IR) Configuration interface, two universal analog inputs and a Math Algorithm. When these are combined with the Accutune III™ tuning with fuzzy logic overshoot...

Honeywell
UDC3500

New Power and Flexibility The UDC3500 Universal Digital Controller packs new powerful features in the popular 1/4 DIN size. Unmatched application power includes: Infrared (IR) Configuration interface, three universal analog inputs, two loops of control and two Math Algorithms. When these are combined with the Accutune III™ tuning with...

Honeywell
(box of 6)

Honeywell universal pens work on most major recorder brands.

Honeywell
10 Inch Circular Charts (box of 100)

Round circular charts for Honeywell industrial recorder.

Honeywell
10 Inch Strip Charts
Honeywell
10260A Series

To operate with maximum efficiency and improve process uptime, state-of-the-art control systems require accurate, responsive, and repeatable actuation of final control devices.

Actuators are often overlooked when considering maintenance and ancillary support costs, yet they play an important role in system performance and can directly...

Honeywell
10260S
TABLE VIII - FACTORY OPTIONS Special Manuals No Special Options (US Manual Standard) 0 _ Other

Honeywell’s HercuLine® 10260S Smart actuators incorporate all of the high quality and reliable features of the traditional HercuLine® actuators plus the added benefits of a microprocessor-based enhanced electronics unit (EEU).

These additional benefits provide:
     Faster set-up and commissioning...

Honeywell
12 Inch Circular Charts (box of 100)
Honeywell
2000 Series

Honeywell’s HercuLine® 2000 series actuators are low torque, precision electric actuators incorporating all of the easy-to-use, high quality, and reliable features of the traditional HercuLine® actuators.

Ensuring processes operate at maximum efficiency, with minimal downtime, and lowest lifetime cost requires...

Honeywell
220738A
Honeywell
4905

Constructed of PES and Ryton for high corrosion resistance, 4905 Series cells can be supplied with nickel, platinum or Monel (depending on cell constant) electrodes, and will provide continuous reliable measurements at temperatures up to 140°C at pressures up to 250 psi.

For insertion applications, the 1” NPT male thread...

Honeywell
4909

4909 Cell Assemblies, available in 316 Stainless Steel or CPVC Plastic, allow insertion or removal of the cell without interruption to the process.

Two safety features, a restraining mechanism and an internal safety stop, provide protection to an operator for safe cell removal at pressures up to 50 psig with caution.

The...

Honeywell
4973 and 4974

These cells are ruggedly constructed for reliable, continuous measurement of electrolytic conductivity in industrial water processes at temperatures up to 140°C and pressures up to 250 psig.

The cells feature polyethersulfone (PES) construction for high-corrosion resistance, with electrodes of titanium (for 0.01 and 0.1 cell...

Honeywell
5000TC Series

The Honeywell 5000TC sensors are specifically designed for the monitoring of conductivity, chemical concentration, or salinity in difficult applications where coating, fouling, corrosion, or high temperatures/ pressures are a concern. The sensor’s 1 ½” diameter bore minimizes rough surfaces to ensure that flow impedance is...

Honeywell
7 Inch Strip Charts
Honeywell
7800 SERIES and R7140

Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.

Honeywell
8 Inch Circular Charts (box of 100)
Honeywell
Accessories
Honeywell
Accessories
Honeywell
Accessories
Honeywell
AT120/ AT140/ AT150A,B/ AT175A

Provide power to 24 Vac circuits in heating/cooling control systems. Intended for use in systems with predictable, uniform loads. Can be used in any application that does not exceed the listed ratings.

Honeywell
AT150F

Provide power to 24 Vac circuits in heating/cooling control systems. Intended for use in systems with predictable, uniform loads. Can be used in any application that does not exceed the listed ratings.

Honeywell
AT175F

Provide power to 24 Vac circuits in heating/cooling control systems. Intended for use in systems with predictable, uniform loads. Can be used in any application that does not exceed the listed ratings.

Honeywell
AT20/AT40
NEMA Standard

Power a 24V control system; for direct mounting, or horizontal or vertical foot-mounting.

Honeywell
AT72
NEMA Standard

24V control circuit step-down transformer designed to power any 24V control system, including thermostats, gas valves and relays.

Honeywell
AT87
NEMA Standard

Used primarily for powering 24V air conditioning circuits. Can also be used in other applications that do not exceed the listed ratings.

Honeywell
AT88

Powers 24 Vac air conditioning circuits and other applications that do not exceed the listed ratings.

Honeywell
Basic PRO 2000

The PRO programmable series provides 24 Vac control for conventional and heat pump systems.

Honeywell
C437

Pressure or differential pressure limit controls for industrial gas systems.

Honeywell
C437

Pressure or differential pressure limit controls for industrial gas systems.

Honeywell
C6097

Pressure Switches are safety devices used in positive-pressure or differential-pressure systems to sense gas or air pressure systems.

Honeywell
C7008

The small size of these devices enable their application to flame detection in installations where space is limited. The holder and flame rod assemblies facilitate flame proving on gas burners or gas-ignited oil burners which are controlled by electronic flame safeguard systems.

Honeywell
C7012
Ultraviolet

The C7012A,C,E,F,G Flame Detectors are solid-state electronic devices for sensing the ultraviolet radiation emitted during combustion of most carbon-containing fuels such as natural gas, LP gas, and oil.

Honeywell
C7012

Solid state electronic flame detectors for use with Honeywell Flame Safeguard controls and amplifiers. Sense ultraviolet radiation produced by combustion of gas, oil, coal or other fuels.

Honeywell
C7027; C7044

Compact flame detector for use with flame safeguard controls with ultraviolet amplifiers.

Honeywell
C7031

Electronic temperature sensors used with DDC Systems.
• Solid state thermistor element provides accurate sensing of temperature changes.

Honeywell
C7035

Compact flame detector for use with flame safeguard controls with ultraviolet amplifiers.

Honeywell
C7041

The C7041 Electronic Temperature Sensors are designed to be used with electronic controllers in domestic or commercial heating and cooling systems.

Honeywell
C7046

Air Temperature Sensors function as primary and/or secondary sensors in electronic control systems.

Honeywell
C7061

Dynamic self-checking flame detector used with R7861 Dynamic Self-check Amplifiers for sensing the ultraviolet radiation generated by the combustion of gas, oil, or other fuels.

Honeywell
C7076

Solid state dynamic self check flame detectors for use with BC7000, R4140 or FSP5075 with R7476 Amplifier and 7800 SERIES with R7886 Amplifier.

Honeywell
C7100
for the T775 Series 2000

Averaging Duct Temperature Sensors are used to sense temperature in discharge duct.

Honeywell
C7130

The C7130A,B Wall-Mount Air Temperature Sensors provide the input required by the R7380J,L, W7100, W7600, W7620, and Excel 500 Control Systems to sense air temperature in indoor spaces.

Honeywell
C7170
for the T775 Series 2000

Primary electronic temperature sensor for the R7380J,L, W7100 and W7505 load inputs for immersion, strap-on and duct mounting.

Honeywell
C7232

The Carbon Dioxide (CO₂) Sensors and Controllers are stand-alone carbon dioxide (CO₂) sensors for use in determining ventilation necessity with HVAC controllers. The sensor measures the CO₂ concentration in the ventilated space or duct. The sensors are used in ventilation and air conditioning systems to control the amount of fresh outdoor...

Honeywell
C7600

Used with any controller capable of processing a 4-20 mA or 2-10 Vdc signal.

Honeywell
C7632

The Carbon Dioxide (CO₂) Sensors offer a fixed 0-2000ppm and fixed 0-10Vdc output. No adjustments are necessary. Like the C7232 sensors, these are for use in determining ventilation necessity with HVAC controllers.

The sensor measures the CO₂ concentration in the ventilated space or duct. The sensors are used in ventilation and...

Honeywell
C7750

The C7750A is a direct wired temperature sensor that is used to sense discharge or return air in a duct that may be controlled by an Excel 10 Controller. The C7750A Sensor consists of a temperature sensitive 20K ohm thermistor that is connected on a circuit board to two linearizing resistors in series-parallel configuration.

Honeywell
C7770A

Direct wired temperature sensor used to sense discharge or return air temperature in a duct controlled by an Excel 10 Series 2000 Controller.

Honeywell
C7772

The C7772 series of wallplate Temperature Sensors are designed to be used with the Excel 5000 family and other Honeywell controllers. The C7772 sensors provide a resistive output signal proportional to sensed room or space temperature. The C7772 is well suited for low profile wall mounted applications where durability and tamper proof...

Honeywell
C7915

The C7915 Flame Sensor includes a lead sulfide photocell that is sensitive to the infrared radiation emitted by the combustion of fuels such as natural gas, oil, and coal.

Honeywell
C7927

The Solid State Ultraviolet Flame Detectors detect the ultraviolet radiation emitted by combustion flames. The flame detectors are used with Honeywell flame safeguard controls to provide flame supervision for gas, oil, or combination gas-oil burners.

Honeywell
C7961

A self-checking flame detector using a solid state UV sensor to detect ultraviolet radiation in flames for supervision of gas, oil or combination gas-oil burners.

Honeywell
C7962

The C7962B Visible Light Flame Detector detects the visible light emitted by fuel oil combustion flames. The C7962B Detector is used with Honeywell Flame Safeguard controls to provide fuel oil flame supervision in commercial and industrial burners

Honeywell
CSP/CSS

All of these sensors have a solid-state output with an adjustable or fixed trip point (setpoint). These current switches should be used in applications in which a “Go/No Go” current switch is required. The current switches can be used to monitor devices with a maximum continuous operating current of up to 250 Amps. These current...

Honeywell
CTP/CTS

Depending on model selected the current is converted into a linear and proportional output signal of 0-5 Vdc, 0-10 Vdc or 4-20 mA, which can be monitored by a building management controller. These current sensors should be used in load trending (current monitoring) type applications. The split core transmitters are ideal for retrofit or...

Honeywell
D2 and D3 Series

D2 series is an ultra-low leakage control damper which includes blade and jamb seals. The D3 series is a general purpose damper intended for applications where low leakage performance is not necessary.

Honeywell
D690

The D690 Round Damper is used in conventional air handling systems to control airflow in a round duct. The damper is designed for use with Honeywell ML6161 and ML7161 Direct Coupled Actuators.

Honeywell
DCP100

The DCP100 is a microprocessor based ¼ DIN programmer/controller for process variable versus time control of temperature, humidity, flow, pressure and other variables. Designed to meet a wide range of application needs, the DCP100 provides 0.25% accuracy, up to 7 digital outputs for event and time sequencing and 6 digital inputs for...

Honeywell
DCP200

The DCP200 with a graphic/text LCD display is an affordable temperature and process controller with advanced functionality including profiling and data logging options. Designed to improve user efficiency many features are integrated to reduce commissioning time, simplify operation and minimize maintenance downtime.

The LCD screen...

Honeywell
DCP300

The DCP 300 is a microprocessor-based ¼ DIN controller programmer that combines high functionally, quality and reliability at a great price. It supports up to 19 program profiles with up to 30 segments per profile. A universal input accepts thermocouple signals, resistance temperature detector (RTD) signals, DC Voltages and DC currents...

Honeywell
DCP551/552

The DCP552 is a high-function programmer/ controller supporting two channels (up to 49 program patterns per channel) to which thermocouple, resistance temperature detector (RTD), DC voltage, DC current and other signals can be input. The DCP552 supports a memory card interface, 16 event outputs, 16 external switch inputs and a wide range of...

Honeywell
DL421/422
for Durafet® II and Meredian® II pH/ORP Electrodes

The Honeywell DirectLine® architecture consists of an electronics module integral to the electrode. This design eliminates the need and added cost of a separate analyzer or transmitter.

The electronics module is sealed in a plastic weather proof, corrosion resistant housing and is connected to the pH/ORP electrode on one side...

Honeywell
DL423
for Conductivity Measurement

The Honeywell DirectLine® architecture consists of an electronics module integral to the conductivity cell. This design eliminates the need and added cost of a separate analyzer or transmitter.

The electronics module is sealed in a plastic weather proof, corrosion resistant housing and is connected to the conductivity cell on...

Honeywell
DL5000
ppm - mg / Liter.ppb - μg / Liter

The DL 5000 Dissolved Oxygen probe is based on a unique equilibrium probe technology. This patented equilibrium probe technology is based on the partial pressure of oxygen rather than the diffusion rate of oxygen through the probe membrane.

The materials of construction combined with this unique design result in a no internal-...

Honeywell
DPR 180

The DPR180 recorder offers the best price/performance in the market today of any 180mm (7 inch) wide chart recorder.

The recorder is able to monitor up to 24 analogue inputs and up to 36 digital inputs.

It produces clear, fully documented charts at any speed, and in different formats, providing the best, most flexible...

Honeywell
DPR 250

The DPR250 recorder offers the best price/performance of any 250mm (10”inch) wide chart recorder in the market today.

The recorder is able to monitor up to 64 analogue inputs or any combination of analogue inputs, digital inputs and outputs that total up to 80.

It produces clear, fully documented charts at any...

Honeywell
DPR100 C/D

The DPR 100 C and D recorders are designed to meet the recording needs for most recording applications. They provide clear and easy to understand charts, full chart documentation and a wide choice of ranges and actuations that allows the user to document the process and what has occurred.
The two versions are:
  DPR 100C:...

Honeywell
DR4300

The DR4300 Circular Chart Recorder provides one of the most cost-effective solutions for dependable pen drawn analog traces on a 10-inch (250 mm) chart.

It is easy to set up and configure to match a wide range of applications such as food processing, environmental monitoring, machine monitoring, flow, water and waste monitoring, for...

Honeywell
DR4500 Truline
Honeywell
eZtrend QXe
27 mm [5.0 in] screen, DIN, 0.1% accuracy

The recorder accepts up to 12 universal analog inputs and stores data in 70 MB of available internal memory for later retrieval. The data is displayed on a five-inch color LCD with wide viewing angles. The operator interface provides easy access to the recorder menus for quick set up and replaying of the data. Data is stored in secure files...

Honeywell
E³Point
Standalone Platform (Single or Dual-Gas Monitoring)
Honeywell
FocusPRO® 5000

The FocusPRO® non-programmable digital thermostat provides electronic control of 24 Vac conventional and heat pump systems or 750 mV heating systems.

Honeywell
H205

Basic enthalpy controller used with Honeywell legacy systems

Honeywell
H46

Provide automatic control of a humidifier or dehumidifier for dehumidification in air conditioning systems.

Honeywell
H600

Operates humidification equipment on RH fall or dehumidification equipment on RH rise.

Honeywell
H600

Operates humidification equipment on RH fall or dehumidification equipment on RH rise.

Honeywell
H705

The H705 Solid State Enthalpy Controller maximizes the use of free outdoor air in place of the first stage of cooling in heating, ventilating and air conditioning (HVAC) economizer systems.

Honeywell
H7625, H7635, and H7655

The H7625, H7635, and H7655 are highly accurate, stable humidity transducers designed for use with HVAC controllers such as the T7350 Thermostat, T775U Remote Humidity Controller, and W7760 Direct Digital Controllers. The Ceramic Technology humidity sensor is not affected by condensation and provides excellent long-term stability.

Honeywell
H8908

H8908 humidity controllers provide automatic low voltage control of humidifiers and dehumidifiers or ventilators, respectively, in central heating and air conditioning systems.

Honeywell
HA20 AND HA40

The HA20 and HA40 controllers are designed to provide simultaneous display and alarm functions for two or four 4-20mA sensor transmitters. The 4-20mA inputs are standard equipped and ideal for interfacing to sensor transmitters that may be long distances from the controller.

HA20 and HA40 controllers are also user friendly and easy...

Honeywell
HA71

The Honeywell Analytics HA71 16 Channel Gas Detection Controller is designed to provide simultaneous display and alarm functions for up to 16 input variables.

The HA71 delivers added value through its multiple capabilities—with simultaneous display and alarm functions for up to 16 input variables. A graphic LCD displays...

Honeywell
HB546

The HB546 pH electrode offers a reliable combination of measuring and reference electrodes together with an integral automatic temperature compensator in a 1-piece corrosion resistant body (the body material is chosen by the customer). The HB546 pH electrodes with 3/4” NPT male connections are easily adapted for in-line mounting without O...

Honeywell
HB551
HB Series Electrodes

The HB551 pH electrode offers a reliable combination of measuring and reference electrodes together with an integral automatic temperature compensator in a 1-piece corrosion resistant body (the body material is chosen by the customer). The HB551 pH electrodes are designed for quick-change in-line installations. The HB551 can also be used in...

Honeywell
HC900

HC900 Controller Controlware is the execution environment, control algorithms and firmware infrastructure programmed into the controller’s memory to allow users to apply the product in process control applications.

A control strategy configuration in the HC900 controller consists of function blocks, or predefined algorithms...

Honeywell
HP970
Two-pipe, single setpoint, pneumatic humidistat used to provide proportional control of pneumatic valves on humidification or dehumidification systems.
Honeywell
HP972
A proportioning pneumatic humidistat used on one- or two-pipe installations for controlling actuators on valves and dampers in air conditioning systems for humidification or dehumidification control.
Honeywell
HPW7000

The HPW7000 Hi-pHurity Water Measurement System is an electrode mounting assembly designed specifically for the difficult pH and ORP measurement in high purity water applications. The special flow chamber and electrode mounting simplifies installation and calibration while providing a pH or ORP measurement that is unsurpassed in accuracy and...

Honeywell
Ignition Transformer Accessories or Parts
Honeywell
Impact personal multi-gas detectors

Impact portable gas detectors bundle feature-rich advantages into a unit offering a low cost of ownership. Available in two configurations (Impact & Impact Pro), Impact models accept serviceable and/or disposable cartridges, are pre-calibrated and ready to go from the box.

The Impact gas detectors are safe, small, lightweight,...

Honeywell
L4006, L6006

Aquastat® Controllers are immersion type devices for limiting or regulating the temperature of liquids in boilers, storage tanks, and other applications where temperature control is required.

Honeywell
L4008,L6008

Aquastat® Controllers are immersion type devices for limiting or regulating the temperature of liquids in boilers, storage tanks, and other applications where temperature control is required.

Honeywell
L4029

L4029E Reset Limit Control opens a line or low voltage circuit if the air temperature reaches a critical level at controller location. The primary usage of the L4029E is as a fire thermostat in the duct work of air conditioning and ventilating systems. If the circulated air reaches a temperature indicative of fire, the limit control shuts off...

Honeywell
L404F

Provide operating control with automatic limit protection for pressure systems up to 300 psi (2068 kPa).

Honeywell
L4064
For control of high limit and fan motor in all types of forced air heating systems.
Honeywell
L4079

High pressure limit switches.

Honeywell
L4081, L6081

High limit, low limit and/or circulator controllers used to regulate boiler water temperature in gas- or oil-fired hydronic heating systems.

Honeywell
L480, L482

Used to limit or control temperature in air conditioning systems or refrigerated enclosures.

Honeywell
L8100

L8100A,B, and C are immersion type controllers for regulating and limiting the tank temperature in water heaters. As the water temperature rises past the setpoint, the controller switches off the gas valve.

Honeywell
L8124

Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems, including domestic hot water service.

Honeywell
L8148

Immersion-type controllers that combine high limit protection with switching relay control of burner and circulator motors.

Honeywell
L91

Modulating pressure operating control for regulation of liquid or air and other non-corrosive gases.

Honeywell
LP907

One-pipe, single setpoint, pneumatic thermostat used to provide proportional control of pneumatic valves and damper actuators in heating and air conditioning systems. Commonly used as discharge controllers for unit ventilators.

Honeywell
LP914

One-pipe, direct-acting temperature sensor used with RP908/ RP920 Controllers to provide proportional control of pneumatic valve or damper actuators. Rod and tube insertion element for duct, well, or through-the-wall mounting.
• Corrosion resistant.
• Continuous temperature indication available by using receiver gage.

Honeywell
LP916

Two-pipe, single temperature, unit mounted, remote bulb pneumatic thermostat used to provide proportional control of pneumatic valves and damper actuators in heating and air conditioning systems.

Honeywell
Lumidor Minimax X4
Multi-gas monitoring made easy – for oxygen, flammable, carbon monoxide and hydrogen sulfide

Minimax X4 is an easy-to-use portable gas detector for protection against flammable, oxygen, carbon monoxide and hydrogen sulfide gas hazards. It’s ideal for use by those companies wanting advanced data logging and product performance, reliability and ease of use without high costs of long term maintenance.

Minimax X4 focuses...

Honeywell
Lumidor Minimax XP
A configurable single-gas detector with many sensor options

The Minimax XP is all about preferences. It delivers advanced, full feature functionality, user configurability with cost effective service ability for a wide range of toxic gases. The market demands more than small size and good looks in a new generation single gas monitor.

A compact and rugged design, maintenance that’s...

Honeywell
M4185 & M8185
60 in-Ib

Series 41 and Series 81 Modutrol IV motors are 2-position (line and low-voltage per motor control) spring-return motors. They are used to operate dampers or valves in applications where it is necessary or desirable to have the controlled element return to the starting position in the event of power failure or interruption.

Honeywell
M6184 & M6194
75-300 in-lb

Series 61 Modutrol IV™ Motors are non-spring return floating control motors used with controllers that provide a switched SPDT or floating output to operate dampers or valves.

Honeywell
M6285
60 in-lb

Series 62 Modutrol IV™ Motors are spring return floating control motors used with controllers that provide a switched SPDT or floating output to operate dampers or valves. These motors also have an internal electrically isolated feedback potentiometer that provides indication of the motor shaft position and can be used for slaving Series...

Honeywell
M6410, M7410

Cartridge Globe Valve Actuators are small Individual Room Control (IRC) electric actuators that provide floating or modulating control of V5852, V5862 two-way or V5853, V5863 three-way valves.

Honeywell
M6415, M7215, M7415, M8415

25 lb-in. spring return damper actuators provide two-position, three-position, floating, or modulating control of economizer systems, ventilation dampers and combustion air dampers used in residential or commercial HVAC equipment.

Honeywell
M6435, M7435

Cartridge Globe Valve Spring Return Actuators are small Individual Room Control (IRC) electric actuators provide floating or modulating control of V5852, V5862 two-way or V5853, V5863 three-way valves.

Honeywell
M7284, M7285 & M7294
Modutrol IV™ Series 2 Motors

Series 72 Modutrol IV Motors are spring return and non-spring return motors (per motor type) used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed.

Honeywell
M9164
35 in-lb

Series 90 Modutrol IV™ motors are non-spring return modulating proportional control motors used with controllers that provide a Series 90 output to operate dampers or valves.

Honeywell
M9184 & M9194
75-300 in-lb

Series 90 Modutrol™ IV Motors are non-spring return modulating proportional control motors used with controllers that provide a Series 90 output to operate dampers or valves.

Honeywell
M9484D,E,F; M9494D,F

Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment. Replaces M941A,C,D motors.

Honeywell
Minitrend QX
140 mm [5.5 in] screen, DIN, 0.1% accuracy

The Minitrend QX uses a 5.5 inch digital color LCD display and fits the standard DIN cutout used by 100 mm [4.0 in] strip chart paper recorders. It provides such advance features as custom screen design, allowing the customer to design the display that best meets the process needs. Other features include the ability to have up to 16 analog...

Honeywell
ML4115
30 lb-in
Spring return direct coupled actuators (DCA) for on/off damper
...
Honeywell
ML4125
100 in-lb

The Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) with an integral junction box for on/off damper control.

Honeywell
ML4135
40 in-lb

The Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) with an integral junction box for on/off damper control.

Honeywell
ML6161, ML7161
35 in-lb

Used to control dampers in applications such as variable air volume (VAV) terminal units and for mounting on ball valves; suitable for use with SPDT or floating thermostats or building automation controls.

Honeywell
ML6420, ML7420

Direct Coupled Globe Valve Actuators mount directly on VGF, V5011, and V5013 steam and water globe valves from 1/2" to 3".

Honeywell
ML6421, ML7421

Direct Coupled Globe Valve Actuators mount directly on V5011 and V5013 steam and water globe valves without a linkage. These Non-Spring Return Actuators will operate 1/2 to 6 in. valves.

Honeywell
ML6425, ML7425

Direct Coupled Globe Valve Actuators mount directly on VGF, V5011, and V5013 steam and water globe valves without a linkage. These Spring Return Actuators will operate 1/2 to 3 in. valves.

Honeywell
ML6984

The ML6984 is a self-contained, self-adjusting, motorized linkage that mounts directly onto V5011 two-way or V5013 three-way valves and provides up to 25 mm (1 ) of linear travel (stem lift). For use with low voltage 3-wire SPDT Series 20 (on-off); Series 60 (floating) electromechanical (dry contacts); or electronic (triac output) controllers...

Honeywell
ML7984

The ML7984 is a self-contained, self-adjusting, motorized linkage that mounts directly onto V5011 two-way or V5013 three-way valves and provides up to 25 mm (1") of linear stem travel. For use with Series 70 2-10Vdc, 4-20mA; Series 90 135 ohm; and Electronic (Super Mod) modulating signals. controllers.

Honeywell
ML7999A, ML7999B

Provides 100 lb-in. torque, pulse-width-modulating (PWM) control of combustion air dampers, butterfly gas valves, oil modulation valves, and flue gas recirculation systems. The actuator includes a precision feedback potentiometer and integral power supply. The ML7999A Actuator is part of the ControLinks® Fuel Air Control System, and must be...

Honeywell
Model R4222; R8222, R8228

Provide heavy duty switching for refrigeration and air conditioning equipment, appliances, vending machines and similar applications.

Honeywell
MP516

Used to control the damper on unit ventilators. Can be adapted to various unit ventilator control cycles. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell unit ventilator damper actuators.

Honeywell
MP909D

Used for pneumatic proportional control of variable volume terminal units and small damper. Available in various operating ranges for either individual or sequence operation with other actuators. Replacement devices are available for Johnson, Powers, Robertshaw, and older Honeywell actuator models.

Honeywell
MP909E,H

These actuators are used for proportional control of variable volume terminal units, mixing boxes, and small to medium sized dampers. They are available in various operating ranges for either independent operation or sequence operation with other actuators. The MP909E has an optional adjustable stroke feature. The MP909H includes a positive...

Honeywell
MP918A,B

Used for proportional control of medium- to large-size dampers in HVAC systems. The MP918A,B are rolling diaphragm, piston-type actuators. The MP918A has a positive positioner. Replacement devices are available for Johnson, Powers, Robertshaw, Barber- Colman, and older Honeywell actuator models.

Honeywell
MP920

Provides proportional control of large dampers in HVAC systems or inlet vanes on a VAV fan. Positive positioner available separately. Replacement devices are available for Robertshaw actuator models.

Honeywell
MP953C,D

Pneumatic actuators provide proportional control of steam or hot or cold liquids in HVAC systems by operating V5011, V5013, and VGF valve assemblies. Replacement devices are available for older Honeywell actuators.

Honeywell
MP953E,F

Pneumatic actuators provide proportional control of steam or hot or cold liquids in HVAC systems by operating V5011, V5013, and VGF valve assemblies. Replacement devices are available for older Honeywell actuators.

Honeywell
MP958

The MP958 Pneumatic Valve Actuator is direct-acting and used only with Honeywell V5852A2xx, V5862A2xx, V5853A2xx, and V5863A2xx Terminal Unit Valves to control hot and/or chilled water.

Honeywell
MS4120F, MS8120F
175 lb-in
Spring return direct coupled actuators (DCA) for on/off damper
...
Honeywell
MS4209F, MS4309F
80 lb-in
Spring return direct coupled actuators (DCA) for on/off damper
...
Honeywell
MZV

Honeywell MZV Series is the first linear zone valve with a built-in balancing plug that permits pre-balancing for each zone.

Honeywell
N05 Series
44 in-lb

This non-spring return direct-coupled damper actuator provides modulating and floating/2-position control for: air dampers, VAV units, air handlers, ventilation flaps, louvers, and reliable control for air damper applications with up to 10 sq. ft./ 44lb.-in. (5 Nm) and 20 sq. ft./88 lb.-in. (10 Nm) (seal-less damper blades; air friction...

Honeywell
N10 Series
88 in-lb

This non-spring return direct coupled damper actuator provides modulating and floating/2-position control for air dampers, VAV units, air handlers, ventilation flaps, louvers, and reliable control for air damper applications with up to 20 sq ft/88 lb-in. (10 Nm) (seal-less damper blades; air friction-dependent).

Honeywell
N20 Series
175 in-lb

These direct coupled damper actuators provide adjustable modulating control for: air dampers, VAV units, air handling units, ventilation flaps, louvers, and reliable control for air damper applications with up to 4.6 m2/50 sq ft (seal-less dampers; air friction-dependent).

Honeywell
N23 Series
300 in-lb

These direct coupled damper actuators provide adjustable modulating control for air dampers, VAV units, air handling units, ventilation flaps, louvers, and reliable control for air damper applications with up to 7.9 m2/85 sq ft (seal-less dampers, air friction-dependent).

Honeywell
Optical Flame Detector Accessories or Parts
Honeywell
P643

Used to convert a pneumatic signal from a controller to an electrical switching action to provide start and stop control of equipment such as fans and pumps. Replacement devices available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell pneumatic/electric switches. Adjustable setpoint.

Honeywell
P658

Pneumatic-electric switches (P658A,B,E and F) used to convert a pneumatic signal from a controller to an electrical switching action (SPDT) to provide start and stop control of equipment such as fans and pumps. Replacement devices available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell pneumatic/ electric switches.

Honeywell
P7810

Line voltage pressure controller that provides automatic operating control, automatic limit protection, manual reset limit protection, and 4-20ma modulating firing rate control for pressure systems up to 300 psi.

Honeywell
PA404

The PA404 is a series 40 (2-wire, SPST) Pressuretrol controller for use in 24, 120, 240 or 277 volt control circuits or in self powered (millivoltage) applications.

Honeywell
PowerPro DP-Series
1 Pole

These electromagnetically-operated Definite Purpose Contactors provide switching for starting induction motors.

Honeywell
PP901

Used to control the pressure of the air delivered to pneumatic control systems. Models available for single-pressure systems or two-pressure systems (Day/Night or Summer/Winter) requiring two independently regulated pressure settings. Dual-pressure units switch from the lower settings to the higher settings when main air is applied to the pilot...

Honeywell
PRO 3000

The PRO series provides non-programmable thermostats for 24 Vac conventional and heat pump systems or 750 mV heating systems.

Honeywell
PRO 4000

The PRO programmable series provides 24 Vac control for conventional and heat pump systems.

Honeywell
PRO Basic 1000

The PRO non-programmable digital thermostat provides electronic control of 24 Vac conventional and heat pump systems (1 heat / 1 cool).

Honeywell
Q100

Connects V51E valve to M9484 and M9494 Modutrol IV Motors with adapter plate.

Honeywell
Q209

Used to limit minimum position of a proportioning Modutrol motor.

Honeywell
Q313

Q313 Thermopile Generator contains multiple thermocouples connected in series to increase the millivoltage output. The power generated is sufficient to operate an automatic millivolt gas control system, independent of any outside power source.

Honeywell
Q340

Thermocouples generate a thermoelectric current that senses a pilot flame on gas-fired heating systems. The pilot flame heats the tip of the thermocouple, producing a temperature differential between it and the base. This temperature difference generates a small amount of DC power, measured in millivolts.

Honeywell
Q390

Thermocouples generate a thermoelectric current that senses a pilot flame on gas-fired heating systems. The pilot flame heats the tip of the thermocouple, producing a temperature differential between it and the base. This temperature difference generates a small amount of DC power, measured in millivolts.

Honeywell
Q5001
The Q5001 Valve Linkage connects a Modutrol™ Motor to a 2- or 3-way valve. It is used primarily on V5011 or V5013 steam and water valves.
Honeywell
Q5001
Linkage Type: Valve Mounting: Linkage mounts directly to the valve bonnet; motor mounts on linkage
The Q5001 Valve Linkage connects a Modutrol™ Motor to a 2- or 3-way valve. It is used primarily on V5011 or V5013 steam and water valves.
Honeywell
Q5001

The Q5001 Valve Linkage connects a Modutrol Motor to a 2- or 3-way valve. It is used primarily on steam and water valves such as the V5011 or V5013.

Honeywell
Q624

Use to ignite pilots on commercial or industrial gas burners.

Honeywell
Q651

Provide manual system switching for T6051 and T6052 Thermostats.

Honeywell
Q652

Use to ignite power gas burners in commercial and industrial applications.

Honeywell
Q7130, Q7230 & Q7330

For converting series 90 Modutrol IV motors to series 70 (electronic) control.

Honeywell
Q7800

Burner, panel or wall mount subbases for 7800 SERIES relay modules and S7830A Expanded Annunciator.

Honeywell
Q7999A

Provides terminals for field wiring for the R7999A ControLinks® Fuel Air Controller. Terminals on the R7999A,B Controller engage the Q7999 contacts to make electrical connections. The Q7999A Subbase is panel-mounted.

Honeywell
R4225; R8225

Provide general purpose and heavy duty switching for refrigeration and air conditioning equipment, appliances, vending machines and similar applications.

Honeywell
R4795
Primary Control with Purge

Provide solid state, electronic flame safeguard protection for commercial and industrial single or dual fuel burners.

Honeywell
R7140

The Honeywell R7140G, L, M Burner Control Modules are microprocessor-based integrated burner control for automatically fired gas, oil or combination fuel single burner applications.

Honeywell
R7247, R7248, R7249, R7476

Solid state plug-in units respond to flame detector signal and indicate presence of flame.

Honeywell
R7257, R7258, R7259

Solid state, plug-in units allow use of rectification, infrared and ultraviolet flame detections.
• Use with Q518, Q519 and W688A Flame Safeguard multi-burner modules and appropriate flame detector.

...
Honeywell
R7289, R7290
Flame Safeguard Amplifiers (for R4795)
Solid state, plug-in units allow use of rectification or ultraviolet flame detection.
Honeywell
R7289, R7290

Solid state, plug-in units allow use of rectification or ultravioletflame detection.
• Use with R4795A,D Flame Safeguard primary controls andappropriate flame detector.

Honeywell
R7795

Provide solid state, electronic flame safeguard protection for commercial and industrial single or dual fuel burners.

Honeywell
R7999A

Uses the latest microprocessor-based technology to simultaneously control up to four actuators. When used with the ML7999 Universal Parallel Positioning Actuators, represents a value-added replacement of mechanical cam and linkage assembly controlling the relationship between fuel, airflow and flue gas recirculation (if used) on a power burner...

Honeywell
R8845U

The R8845U Universal Switching Relay with 24 V transformer provides intermediate switching of line-and low-voltage devices from a line- or low-voltage controller and is typically applied in Hydronic heating systems.

Honeywell
RA890F
Primary control provides solid state, electronic flame safeguard protection for industrial and commercial single or dual fuel burners for rectification type flame detection.
Honeywell
RA890G
Protectorelay™ Primary Control

Primary control provides solid state, electronic flame safeguard protection for industrial and commercial single or dual fuel burners applications using Ultraviolet flame detectors.

Honeywell
RA890G

Primary control provides solid state, electronic flame safeguard protection for industrial and commercial single or dual fuel burners applications using Ultraviolet flame detectors.

Honeywell
RA89; RA832; R845

Provide intermediate switching of a line voltage device from a low voltage controller.

Honeywell
RM7800

Microprocessor-based integrated burner control for automatically fired gas, oil, coal or combination fuel single burner applications. Provides safety, functional capability and features beyond conventional controls.

Honeywell
RM7823

Microprocessor-based integrated flame switch for detecting a flame using rectification, ultraviolet (UV) or infrared (IR) source. Provides level of safety, functional capability and features beyond conventional controls.

Honeywell
RM7824

24 Vdc microprocessor-based integrated burner control for automatically fired gas, oil or combination fuel single burner applications. Provides level of safety, functional capability and features beyond the capacity of conventional controls.

Honeywell
RM7838A

Microprocessor-based integrated burner control for industrial semi-automatically fired gas, oil, coal or combination fuel single burner applications. Provides level of safety, functional capability and features beyond conventional controls.

Honeywell
RM7838B,C

Microprocessor-based integrated burner control for industrial semi-automatically fired gas, oil, coal or combination fuel single burner applications. Provides level of safety, functional capability and features beyond conventional controls.

Honeywell
RM7838B,C

Microprocessor-based integrated burner control for industrial semi-automatically fired gas, oil, coal or combination fuel single burner applications. Provides level of safety, functional capability and features beyond conventional controls. Includes Valve Proving Feature.

Honeywell
RM7840

Microprocessor-based integrated burner control for automatically fired gas, oil, coal or combination fuel single burner applications. Provides safety, functional capability and features beyond conventional controls.

Honeywell
RM7840

Microprocessor-based integrated burner control for automatically fired gas, oil, coal or combination fuel single burner applications. Provides safety, functional capability and features beyond conventional controls. With Valve Proving Feature. RM7800L comes standard with S7800A1142 Keyboard Display.

Honeywell
RM7888

Microprocessor-based integrated burner control for industrial process semi-automatically fired gas, oil, coal, or combination fuels for single and multiple burner applications. Provides level of safety, functional capability and features beyond conventional controls.

Honeywell
RM7890

Microprocessor-based integrated primary burner control for automatically fired gas, oil or combination fuel single burner applications. Provides level of safety, functional capability and features beyond conventional controls.

Honeywell
RM7890

Microprocessor-based integrated primary burner control for automatically fired gas, oil or combination fuel single burner applications. Provides level of safety, functional capability and features beyond conventional controls.

Honeywell
RM7895

Microprocessor-based integrated primary burner control for automatically fired gas, oil, or combination fuel single burner applications. Provides level of safety, functional capability and features beyond conventional controls.

Honeywell
RM7896

Microprocessor-based integrated full-function primary burner control for automatically fired gas, oil, or combination fuel single burner applications. Provides level of safety, functional capability and features beyond conventional controls.

Honeywell
RM7897

Microprocessor-based integrated full-function primary burner control for automatically fired gas, oil, or combination fuel single burner applications. Provides level of safety, functional capability and features beyond conventional controls. Along with Programmable Post Purge

Honeywell
RM7898

Microprocessor-based integrated full-function primary burner control for automatically fired gas, oil, or combination fuel single burner applications. Provides level of safety, functional capability and features beyond conventional controls. Include Programmable Post Purge and Valve Proving Feature.

Honeywell
RP418, RP818

Electrically operated pneumatic switches used to interlock an electrical system and a pneumatic control system. Replacement devices are available for Johnson, Powers, Robertshaw, Barber- Colman, and older Honeywell devices.

Honeywell
RP470

Three-port relays used in HVAC systems to perform a variety of relay functions; transmit the higher of two input signals, lock out one pressure signal when a second signal is higher, or transmit the lower of two pressure signals. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell devices.

Honeywell
RP471

The four port, snap acting relay converts a proportional air pressure change from a controller to a positive (two-position) pressure change. It can also divert a supply line to one of two branches. Replacement device is available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell devices.

Honeywell
RP670

Pneumatic switching relays block, divert, or bleed pneumatic air lines when pilot pressure is changed from one specific value to another. Commonly applied in Day-Night, Summer-Winter, Start-Stop, On-Off-Auto and other multiple condition systems where control sequence is changed as conditions change. Replacement devices are available for...

Honeywell
RP7517

Electronic-Pneumatic Transducers are used in electronic pneumatic control systems to convert a proportional electric output signal from a controller into a direct-acting, proportional pneumatic signal.

Honeywell
RP7517

Electronic-Pneumatic Transducers are used in electronic pneumatic control systems to convert a proportional electric output signal from a controller into a direct-acting, proportional pneumatic signal.

Honeywell
RP913

A diaphragm logic pressure selector selects the highest and/or lowest branch pressure input from zone thermostats to operate final control elements in pneumatic control applications. Replacement devices are available for Johnson, Powers, Robertshaw, and Barber-Colman devices.

Honeywell
RP920

Proportional, high capacity, single or dual input pneumatic controller used in conjunction with remote sensors to provide proportional (P) or proportional plus integral (P+I) control of temperature, humidity, pressure, or dopant for heating and air conditioning systems. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-...

Honeywell
RP922

A three-port pneumatic potentiometer can sum two input pressures, average two input pressures, be an adjustable flow restriction, or be an adjustable pressure supply. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell devices.

Honeywell
RP970

Direct acting, modulating relay provides increased capacity of the branchline pressure to the final control device. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell devices.

Honeywell
RP971

A four port non-bleed pneumatic relay which produces a modulating pressure output, proportional in a fixed ratio to pilot input changes. It is used to control pneumatic valve or damper actuators in sequence from a single thermostat. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell devices.

Honeywell
RP972

A modulating relay suitable for all types of heating and air conditioning control systems to reverse and increase the capacity of the branchline pressure to the final control element. The output varies inversely with the input with an adjustable offset. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman, and older...

Honeywell
RP973

A three-port relay used in HVAC systems averages the signals from two thermostats to control a single device such as a heating coil valve for a multizone unit. The pneumatic averaging relay provides an output pressure equal to the average of two input pressures. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman,...

Honeywell
RP975

A three-port hesitation relay provides minimum outside air damper position plus controlled ventilation for large volume unit ventilators. Replacement devices are available for Johnson, Powers, and Barber-Colman devices.

Honeywell
S03
27 in-lb

MS8103, MS4103, MS7503, MS7403 Spring Return Direct Coupled Actuators (DCA) are used within heating, ventilating, and air-conditioning (HVAC) systems. They can drive a variety of quarter-turn, final control elements requiring spring return fail-safe operation.

Honeywell
S05 Series
44 in-lb

MS4105, MS7505, MS8105 Spring Return Direct Coupled Actuators (DCA) are used within heating, ventilating, and air-conditioning (HVAC) systems. They can drive a variety of quarter-turn, final control elements requiring spring return fail-safe operation.

Honeywell
S10 Series
88 in-lb

MS4110, MS7510, MS8110 S10 Series Spring Return Direct Coupled Actuators (DCA) are used within heating, ventilating, and air-conditioning (HVAC) systems. They can drive a variety of quarterturn, final control elements requiring spring return fail-safe operation.

Honeywell
S20 Series
175 in-lb

MS4120, MS7520, MS8120 Spring Return Direct Coupled Actuators (DCA) are used within heating, ventilating, and air-conditioning (HVAC) systems. They can drive a variety of quarter-turn, final control elements requiring spring return fail-safe operation.

Honeywell
S7800A1142

Provides current status of burner sequence, timing information, hold information and lockout information, as well as selectable or preemptive messages.

Honeywell
S7810A

Supports remote mounting of S7800 Keyboard Display Module, personal computer communications interface and remote reset.

Honeywell
S7810B

Supports remote mounting of S7800 Keyboard Display Module, personal computer communications interface and remote reset.

Honeywell
S7810M

Supports remote mounting of S7800 Keyboard Display Module, personal computer communications interface and remote reset.

Honeywell
S7820

Serves as link between remote reset push button and relay module. Allows 7800 SERIES relay module to be reset from a remote location.

Honeywell
S7830

Microprocessor-based expanded annunciator to support the 7800 SERIES relay modules for first-out annunciation, sequencing, system or self-diagnostics and troubleshooting.

Honeywell
S87

Provide electronic control of direct spark ignition systems used on gas fire furnaces, boilers, and other heating appliances.

Honeywell
S89C

Provide operating control and system shutdown on loss of main burner flame in direct ignition central heat furnaces and heating appliances with hot surface igniter.

Honeywell
S89E,F

Provide electronic control of direct spark ignition systems, with external spark transformers, used on gas-fired furnaces, boilers, conversion burners and other heating appliances.

Honeywell
Searchline Excel

The Searchline Excel is the world’s best selling infrared open path gas detector with over 6,000 units installed in challenging applications throughout industry. From the Arctic Circle to Middle Eastern Deserts, customers have repeatedly selected the Searchline Excel as their preferred choice.

Honeywell
SmartVFD BYPASS

For system critical applications, you must be able to select a bypass that meets the requirements of the specification. The SmartVFD Bypass is easy to specify, select, install and commission. The SmartVFD Bypass is UL certified and is the perfect complement to the advanced capabilities of the SmartVFD family — a combination that is both...

Honeywell
SP970

Used to manually position a remote damper actuator or to reset the setpoint of a pneumatic controller. They can also provide minimum damper position by setting a minimum pressure limit in the branch line to the damper actuator. Replacement kits are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell switches.

Honeywell
ST3000
Types STD100 and STD900

Differential pressure transmitters are used primarily in flow applications in concert with a measuring element such as an orifice plate, pitot tube, or V-Cone type sensor. These devices measure the difference between 2 pressures and provide a linear or square root analog output signal in proportion to the difference. DP transmitters are also...

Honeywell
ST3000
Types STA100 and STA900

Absolute pressure transmitters are used primarily in applications where the pressure being measured is less than standard atmospheric pressure such as a suction or vacuum application. These devices provide a linear analog output signal pressure measured relative to absolute zero. The temperature of the media being measured is very important as...

Honeywell
ST3000
Types STG100 and STG900

Gauge pressure transmitters are used primarily in applications where the normal pressure is greater than normal atmospheric pressure. These devices provide a linear analog output signal in proportion to the pressure. GP transmitters are also used in some level applications where the pressure inside a duct or the level of fluid inside a tank is...

Honeywell
ST3000

Flange mounted level transmitters are essentially DP transmitters where a process mounting flange is used instead of the NPT process connection on a DP transmitter. These transmitters are used to measure fluid level in vented or pressurized tanks.

The mounting flange is connected to the High Pressure port, and the Low Pressure port...

Honeywell
ST71A
Pre-Purge Timer
Honeywell
ST7800
Plug In PurgeTimer
Honeywell
ST795A
Purge Timer (for R7795)
Honeywell
STDW900 Series
Differential Pressure Models

Building upon the tremendously successful ST 3000 series transmitter line; Honeywell brings simple, safe, and secure wireless technology to its measurement portfolio in the XYR 6000 Series Wireless Transmitters.

The XYR 6000 series measurements are part of the Honeywell One Wireless system and are ISA100 - ready field devices....

Honeywell
STIW600 Series

Building upon the tremendously successful ST 3000 series transmitter line; Honeywell brings simple, safe, and secure wireless technology to its measurement portfolio in the XYR 6000 Series Wireless Transmitters.

The XYR 6000 series measurements are part of the Honeywell One Wireless system and are ISA100 - ready field devices.
...

Honeywell
STT170 Low Cost Temperature Transmitters

The STT170 is a cost-effective solution for temperature monitoring applications and can be programmed for high or low limit alarms to activate in case of sensor failure.

Honeywell
STT250 Temperature Transmitters

The STT250 offers advanced functionality and competitive performance in a more compact module.

Honeywell
STTWT400 Series

Building upon the tremendously successful ST 3000 series transmitter line; Honeywell brings simple, safe, and secure wireless technology to its measurement portfolio in the XYR 6000 Series Wireless Transmitters.

The XYR 6000 series measurements are part of the Honeywell One Wireless system and are ISA100 - ready field devices.

...

Honeywell
STUW700 Series

Save time and money by eliminating the manual reading of field devices and by avoiding the cost of installing long runs of cable by using the XYR 6000 Wireless Universal I/O transmitter. In addition, improve monitoring capabilities by automating the collection of information from remote field devices with a flexible I/O transmitter that are...

Honeywell
T100

Allow automatic temperature control in two-pipe steam or hot water systems for free standing radiators, convectors, and other heating units with standard capacity requirements. Provide comfort and energy savings at affordable prices.

Honeywell
T104

Provide precise and automatic control of room temperature in two-pipe systems by modulating the flow of hot water or steam through free-standing radiators, convectors and other heating units with high capacity requirements.

Honeywell
T4031A; T6031A

Provide limit or temperature control in refrigerated areas where remote mounting of sensing element is required.

Honeywell
T4031C; T6031C,D,F

Ambient temperature compensated, high-limit controllers for agriculture and industrial applications.

Honeywell
T451;T651

Light Duty Line Voltage Thermostats control line voltage valves, motors, contractors, electric heat, elements, duct furnaces, and fan coil units in heating/cooling systems

Honeywell
T498

Electric Heat Thermostats provide line voltage control of electric heating systems.

Honeywell
T6051; T6052

Heavy Duty Line Voltage Thermostats used to control fan coils, fans, motor starters, valves, contactors, and circulator motors in heating and/or cooling systems.

Honeywell
T675A,B, T678A

Remote bulb thermostats regulate temperature of air or liquids in ducts, pipes, tanks and boilers.

Honeywell
T7022A

The T7022 Remote Temperature Sensor is a non-adjustable thermistor sensor. Its primary use is with the T7300 Programmable Commercial Thermostat (only in return air) to control heating or cooling equipment.

Honeywell
T7047
for use with T7300 Thermostats

The T7047 Electronic Thermostats, Remote Space Sensors are used with T7300 thermostats and W973 controller to provide modulating space temperature control.

Honeywell
T7147
for use with T7300 Thermostats

For use with T7300/Q7300 Thermostat system to provide space temperature sensing, and switch initiation and indication of overrides from remote location.

Honeywell
T7350

T7350 Thermostats control 24 Vac commercial single-zone multistage conventional, heat pump and modulating HVAC equipment.

Honeywell
T7350
T7350H Communicating Thermostats control 24 Vac commercial single-zone multistage conventional, heat pump and modulating HVAC equipment. Additionally, the T7350H allows remote access and the sharing of clock, schedule, setpoints, bypass and other system parameters with other devices in a LONWORKS® network.
Honeywell
T7351F

The T7351 Commercial Programmable Thermostat controls 24 Vac commercial single zone heating, ventilating and air conditioning (HVAC) equipment. The T7351 consists of a thermostat and subbase. The thermostat includes the keypad and display for 365- day programming. The subbase includes equipment control connections. The subbase mounts on the...

Honeywell
T775 Series 2000
The T775 electronic remote temperature controllers are the next generation of commercial and agricultural controls capable of remote sensing of temperature and providing switched and/or proportional outputs to various types of loads.
Honeywell
T775 Series 2000

The T775 electronic remote temperature controllers are the next generation of commercial and agricultural controls capable of remote sensing of temperature, humidity, pressure, etc., and providing switched and/or proportional outputs to various types of loads.

Honeywell
T775 Series 2000

The T775 temperature sensors are 1097 Ohm sensors for use with the T775 Series 2000 electronic standalone controller in commercial heating and cooling applications.

Honeywell
T7750

Temperature sensors for use with Excel 10 Series 1000 Controllers. The T7750 Wall Modules provide the following additional combination of options to the customer: analog setpoint input and for models used with Excel 10 Controllers, override (bypass) digital input contact, LED status indicator and network access jack.

Honeywell
T7771

The T7771A Remote Temperature Sensors are direct wired wall modules for use with the Honeywell T7350 Commercial Programmable Thermostat. The T7771A has a space temperature sensor, LED push button setpoint adjustment, and override with LED.

Honeywell
T8775A,C

The T8775A Thermostat provides 24V control of heating only systems. The T8775C Thermostat provides single-stage temperature control for 24V heating-cooling systems with manual changeover from heat to cool.

Honeywell
T8775A,C
The T8775A Thermostat provides 24V control of heating only systems. The T8775C Thermostat provides single-stage temperature control for 24V heating-cooling systems with manual changeover from heat to cool.
Honeywell
T915

Proportional remote bulb controllers for ducts, tanks, boilers, pipes and other heat exchangers.

Honeywell
T921

Proportional Thermostats provide low voltage, 3-wire control for valve motors, damper motors, and balancing relays in heating or cooling system applications.

Honeywell
T991A

For modulating control of water or air temperature in ducts, tanks and similar applications.

Honeywell
TP9600

Pneumatic thermostat for proportional control of pneumatic valves and actuators with one- or two-pipe systems. Available with two cover options, the TP9600 is not only affordable and easy to install, but it controls temperature with the reliability that only Honeywell can provide.

Honeywell
TP970

Two-pipe, single setpoint, pneumatic thermostat used to provide proportional control of pneumatic valves and damper actuators in heating and air conditioning systems. Replacement kits are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell two-pipe pneumatic thermostats.

Honeywell
TP971

Pneumatic thermostat with night setback used to provide proportional control of pneumatic valves and damper actuators in heating and air conditioning systems. Replacement kits are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell two-pipe pneumatic thermostats.

Honeywell
TP972

Two-pipe, one- or two-temperature, pneumatic thermostat used to provide proportional control of pneumatic valves and damper actuators in heating and air conditioning systems. Replacement kits are available for Johnson, Powers, Robertshaw, Barber- Colman, and older Honeywell two-pipe pneumatic thermostats.

Honeywell
TP973

One- or two-pipe, single temperature, low capacity, pneumatic thermostat used to provide proportional control of pneumatic valves and damper actuators in heating and air conditioning systems. Replacement kits are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell pneumatic thermostats.

Honeywell
TP974

One- or two-pipe direct-acting temperature sensor used with RP908/RP920 Controllers to provide proportional control of pneumatic valve and damper actuators.

Honeywell
TR20 Series

The TR21, TR22, TR23, and TR24 are a family of direct wired wall modules for use with Honeywell Excel 600, 500, 100, and 80 controllers; Excel 10 W7750, W7751A, W7752, and W7753 controllers; W7761 Controller; and Spyder Unitary Controllers. All models have a space temperature sensor.

Honeywell
TrendManager Suite

PC Application Software Configuration and Analysis Tool.

The TrendManager Suite software is a Windows based PC package that complements the Honeywell line of data acquisition products. It provides the capability to configure, analyse and network recorders for data acquisition.

The TrendManager software ties your process...

Honeywell
TrueIAQ

Provides integrated control of humidifiers, dehumidifiers, ventilators and exhaust bath fans via an intuitive back-lit digital display. Includes outdoor sensor for temperature and humidity for advanced IAQ programming.

Honeywell
UDA2182

The UDA2182 Universal Dual Analyzer is a new, economical, dual input analyzer addition to Honeywell’s Smart Sensor product family.

The analyzer can accept single or dual inputs from Honeywell pH, ORP, contacting conductivity and dissolved oxygen sensors. For dual units the inputs can be ordered in any combination.

...

Honeywell
V110

High Capacity Thermostatic Radiator Valves provide precise and automatic control of room temperature in two-pipe systems by modulating the flow of hot water or steam through free-standing radiators, convectors and other heating units with high capacity requirements.

Honeywell
V2000

One-Pipe Steam Thermostatic Radiator Valves - Allow automatic temperature control in one-pipe steam or hot water systems for free standing radiators, convectors and other heating units with standard capacity requirements. Provide comfort and energy savings.

Honeywell
V4043

Two way on-off line voltage valves consist of an actuator motor and valve assembly for controlling the flow of hot or chilled water. 

Honeywell
V4043

Two way on-off line voltage valves consist of an actuator motor and valve assembly for controlling the flow of low pressure steam.

Honeywell
V4044

On-off and diverting line voltage valves consist of an actuator motor and valve assembly for controlling the flow of hot or chilled water.

Honeywell
V4055A,B,D,E

Use in combination with V5055 or V5097 Gas Valves to control gas supply to commercial and industrial burners.

Honeywell
V4062

Use with V5055 or V5097 Gas Valves to control gas supply for commercial and industrial burners. Valve opens to low fire position when power is applied; valve opens all the way on demand.

Honeywell
V48A,V88A

Solenoid-operated diaphragm valves provide slow opening and fast closing for controlling fuel gases.

Honeywell
V5011 A,B

Used for proportional control of hot or chilled water and glycol solutions (to 50 percent concentration) and for two-position control of low pressure steam.

Honeywell
V5011N

Used for two-position or modulating control of steam and water and glycol solutions (to 50 percent concentration) in heating or cooling systems.

Honeywell
V5013N

The V5013N is a three-way threaded globe valve that controls hot water, cold water, and glycol solutions (up to 50 percent concentration) in heating or cooling HVAC applications. The valves are used for mixing service to direct flow from one or two inlets to a common outlet in two-position or modulating control systems.

Honeywell
V5055

Safety shutoff valves used with V4055, V4062 and V9055 fluid power actuators to control gas flow to commercial and industrial burners.

Honeywell
V5097

Safety shutoff valves used with V4055, V4062 and V9055 fluid power actuators to control gas flow to commercial and industrial burners.

Honeywell
V51

Provides modulating control of natural, manufactured, LP gases or air.

Honeywell
V51

Provides modulating control of natural, manufactured, LP gases or air.

Honeywell
V5852, V5862

Two-way Cartridge Globe Valves control hot and/or chilled water for VAV terminal units, fan coil units, small reheaters and recoolers in electric/electronic temperature control systems. Used with the M6410 3-position floating Non-Spring Return Valve Actuator and the M7410 selectable 0 to 10 Vdc or 2 to 10 Vdc Non-Spring Return Actuator. The 1/2...

Honeywell
V5853, V5863

Three-way Cartridge Globe Valves control hot and/or chilled water for VAV terminal units, fan coil units, small reheaters and recoolers in electric/ electronic temperature control systems. Used with the M6410 3-position floating Non-Spring Return Valve Actuator and the M7410 selectable 0 to 10 Vdc or 2 to 10 Vdc Non-Spring Return Actuator. The...

Honeywell
V8043

Two-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water.

Honeywell
V8044

On-off and diverting low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water.

Honeywell
V9055

Use with V5055 or V5097 Gas Valves to control gas supply for commercial and industrial burners. Valve opens to low fire position when power is applied; valve opens all the way on demand.

Honeywell
VA201T

The 201T gas detection transmitter is designed to meet or exceed safety requirements in a variety of commercial and industrial applications.

The 201T series transmitters are able to detect a wide range of toxic and explosive gases. The 201T gas detection transmitter can work in an addressable network mode with the 301C controller...

Honeywell
VA301C

The VA301C continuously monitors and controls toxic gases, combustible gases, and oxygen hazards. Designed for installation and operational simplicity, the VA301C reduces the cost of installation and ownership.

Using an addressable RS-485 Modbus communication protocol, the 301C uses daisy chain wiring requiring only 2 pairs of wires...

Honeywell
VA301EM

The VA 301EM-20 acts as a controller for up to 20 remote sensors and suits a variety of gas detection system solutions for Mechanical Rooms.

Particularly configured to meet ASHRAE 15, B-52 and International Mechanical Code requirements, the VA301EM is commonly used to optimize gas detection i n mechanical and chiller rooms. A full...

Honeywell
VBN2
The VBN2 Two-Way Control Ball Valves control hot and chilled water with glycol solutions up to 50% in heating, ventilating, and air conditioning (HVAC) systems to provide two-position or modulating functions. These valve assemblies can be ordered with or without factory-mounted non-spring return or spring return direct-coupled actuators (DCA).
Honeywell
VBN2

The VBN2 Two-Way Control Ball Valves control hot and chilled water with glycol solutions up to 50% in heating, ventilating, and air conditioning (HVAC) systems to provide two-position or modulating functions. These valve assemblies can be ordered with or without factory-mounted non-spring return or spring return direct-coupled actuators (DCA...

Honeywell
VC

Control central heating and/or cooling systems, fan coil systems, radiators and convectors. Depending on the model selected, it can be controlled by either a low or line voltage SPST or SPDT or floating controller such as a room thermostat, Aquastat control, or flow switch.

Honeywell
VersaFlow

Honeywell’s VersaFlow stands for continuity and long term reliability. Flow measurement can be done anywhere and startup is immediate. The new VersaFlow clamp on flowmeter for liquids with its robust industrial construction and regreasing concept provides a revolutionary solution for easy handling.

Honeywell
VersaFlow Coriolis 1000

The VersaFlow mass flow sensor is the only mass flow sensor with a straight measuring tube that is available in Hastelloy®, titanium or stainless steel. VersaFlow reliably measures mass flow, density, volume, temperature, mass or volume concentration and solids content.

Honeywell
VersaFlow Coriolis 200

The VersaFlow Coriolis 200 has been developed to meet the demanding transfer requirements of the oil and gas industry. It is well suited to bulk measurement in many applications.

A high level of performance makes the VersaFlow Coriolis 200 suitable for the bulk measurement of petroleum and oil as well as products like syrup,...

Honeywell
VersaFlow Mag 100

The VersaFlow Mag 100 flow sensor is an economical solution for a wide range of applications. VersaFlow Mag 100 can be used in applications (including various aqueous solutions), where other measurement techniques e.g. turbines, venturi, etc. were previously used. VersaFlow is suitable for even the most demanding applications and is recognized...

Honeywell
VersaFlow Mag 1000

The VERSAFLOW electromagnetic flow sensor is the optimum solution for water and wastewater applications. Its long-term reliability and durability make it the standard flow sensor for the water market.

Honeywell
VersaFlow Mag 3000

The VersaFlow Mag 3000 is the electromagnetic flow sensor for the food and beverage industry. The 3000 sensor is manufactured in conformance to FDA requirements and has all requested (needed) approvals available. As an add on, a EHEDG approval is available and documents the hygienic design and the clean ability of the device.

...

Honeywell
VersaFlow Mag 4000

The VersaFlow electromagnetic flow sensor is a process industry standard suitable for the most demanding applications.

Honeywell
VersaFlow TWM 9000

The TWM 9000 is the only electromagnetic flow converter with diagnostics for the instrument and application. TWM 9000 is compatible with all electromagnetic flow sensors and is suitable for all applications.

Honeywell
VersaFlow Vortex 100

The VERSAFLOW is the only vortex flowmeter with integrated pressure and temperature compensation in 2- wire technology. The VERSAFLOW Vortex Flow Meter provides reliable measurement of operating, standard volumetric and mass flow of conductive and non-conductive liquids, gases and vapors, even with fluctuating pressures and temperatures

Honeywell
VFF1

Resilient seat in two-way valves, provide control for HVAC system applications including chilled water, hot water, cooling tower water, thermal storage systems, and steam.

Honeywell
VFF2

Resilient seat two-way valves provide control for HVAC system applications including chilled water, hot water, cooling tower water, thermal storage systems, and steam.

Honeywell
VFF3

Resilient seat three-way valves provide control for HVAC system applications including chilled water, hot water, cooling tower water, thermal storage systems, and steam.

Honeywell
VFF6

Resilient seat three-way valves provide control for HVAC system applications including chilled water, hot water, cooling tower water, thermal storage systems, and steam.

Honeywell
VGF2

VGF Flanged Globe Valves are used for 2-position or modulating control of steam, hot water, or chilled water-glycol solutions up to 50% concentration in heating, ventilation and air conditioning (HVAC) systems. They can be operated by ML6984/7984, ML6420/6425, ML6421/7421 Electric Linear Actuators, MP953 Pneumatic Actuators, Modutrol®...

Honeywell
VGF3

VGF Flanged Globe Valves are used for 2-position or modulating control of steam, hot water, or chilled water-glycol solutions up to 50% concentration in heating, ventilation and air conditioning (HVAC) systems. They can be operated by ML6984/7984, ML6420/6425, ML6421/7421 Electric Linear Actuators, MP953 Pneumatic Actuators, Modutrol®...

Honeywell
VisionPRO® IAQ

The VisionPRO IAQ touch screen universal programmable thermostat provides electronic control of 24 Vac heating and cooling systems in addition to humidification dehumidification and ventilation.

Honeywell
VP-131
Honeywell
VP512

A normally open, single seated, straight-through or angle globe valve used for proportional control of steam or hot water in unit ventilator applications. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell devices.

Honeywell
VP513

Single-seated, straight-through, pneumatic valves used for proportional control of unit air conditioners using hot and/or chilled water. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell devices.

Honeywell
VP527

Normally open, single-seated, high pressure valve provides proportional control of hot and/or cold water in unit air conditioners and fan coil units. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell devices.

Honeywell
WA/WG500 Series

XYR 5000 wireless pressure transmitters give you the ability to transmit data from areas where hard-wired measuring devices have been too costly, difficult or time consuming.

The power and simplicity of the XYR 5000 transmitters will allow you to easily and economically increase the number, type and frequency of measurements you make in...

Honeywell
WBR/WBH Series

The Wireless Base Radio (WBR) is part of the XYR 5000 family of wireless products. It combines an RF transceiver and the interface to a SCADA, DCS, or data acquisition device. The WBR Radio Frequency (RF) transceiver communicates in a digital protocol, using Frequency Hopping Spread Spectrum (FHSS). FHSS ensures data integrity by continually...

Honeywell
WD62X Series

The WD62x is part of the XYR 5000 family of wireless products. These transmitters cover a wide differential pressure range, and can be used to monitor a variety of processes and assets in hazardous and remote areas. The WD62x can be set to operate in four modes: differential pressure, orifice flow, open channel flow, and level. Since there are...

Honeywell
WEB-201

The Honeywell WEB-201 controller is a compact, embedded controller/server platform. Its combine integrated control, supervision, data logging, alarming, scheduling and network management features in a small, compact platform. The WEB-201 controller is a member of the Honeywell WEBs-AX suite of JAVA based controller/server products.

Honeywell
WEB-600

The WEB-600 controller serves data and rich graphical displays to a standard web browser via an Ethernet LAN or remotely over the Internet, or dial-up modem. In larger facilities, multi-building applications and large scale control system integrations, WEBStation-AX software can be used to aggregate information (real-time data, history, alarms...

Honeywell
WI550 Series

The WI550 Analog Input Field Transmitter is part of the XYR 5000 family of wireless products. It is used to add wireless capabilities to new or existing analog transmitters, such as pressure, temperature, level, flow meters, pH meters, or any device that has voltage (0 – 10 V) or current (4 – 20 mA) outputs.

The Smart...

Honeywell
WT532 Series

The WT530 Temperature Transmitter is part of the XYR 5000 family of wireless products. These transmitters are wireless temperature transmitters that can be used to monitor a variety of processes in hazardous and remote areas.

Since there are no wires to run, the transmitter can be installed and operational in minutes, quickly...

Honeywell
XCD

The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, non-intrusive...

Honeywell
XNX

XNX’s modular design enables Honeywell Analytics to offer appropriate, cost effective solutions to a wide range of gas detection requirements. The XNX Universal Transmitter is an excellent choice for those who want a total integrated monitoring and safety solution for an industrial plant. With the XNX, you are freed from the need to add...

Honeywell
XYR3000 D/E Series

The XYR300D Wireless Serial Radio Modem product provides RS232 or RS485 connections by radio. It is a low cost wireless alternative for linking PLC data loggers, supervisory computers, and intelligent transducers.

The XYR300D has been designed to be easy to use and simple to install. It uses a 900MHz spread spectrum radio which does not...

Honeywell
XYR3000 G Series

The XYR300G Wireless gateway products provide a wireless interface between various data buses used in process and automation applications. The gateway includes an integral 900MHz license-free radio transceiver, and transfers transducer and control signals (I/O) using the highly secure and highly reliable  WIB-smart radio protocol.

Honeywell
XYR3000 Series

The XYR3000 Family range of telemetry modules provide remote monitoring and control by radio or twisted-pair wire, over short or long distances. Transducer signals connected at one module (input signals) are transmitted to another module where the signals are re-created as output signals, or passed via RS232/485 to a host device such as a PLC...

Honeywell
Y8610U

Complete kits converting conventional standing pilot system to intermittent pilot system. For use with 24 Vac gas-fired atmospheric furnaces, boiler and heating appliances.

Honeywell
ZonePRO®

The ZonePRO® thermostats are for low-voltage pressuredependent variable air volume (VAV) applications. ZonePRO® can also be used for hydronic perimeter heating/cooling and bypass box with or without reheat. The four models cover modulating applications, floating applications and applications that require up to two additional outputs for...