|
ACI
The A/RH-TEMP Series Relative Humidity transmitters, convert a resistance to a linear 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC output. The current signal may be transmitted over long distances on unshielded twisted-pair wire and will not be affected by the lead wire resistance or electrical noise.
The Advanced Ceramic Technology...
The A/RH Series Relative Humidity transmitters, convert a resistance change to a linear 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC output. The current signal may be transmitted over long distances on twisted-pair wire and will not be affected by the lead wire resistance or electrical noise.
The Advanced Ceramic Technology design...
The A/DP series is a line of low differential pressure transmitters that are capable of sensing full scale ranges down to 0.25” of water column. Each ACI pressure transmitter utilizes a high quality ceramic capacitive sensor to provide long term stability and performance. Variable capacitance sensors have a good signal to noise ratio and...
The A/LP Series transmitters are a low cost alternative to the A/DP series pressure transmitters. The A/LP Series is a 4-20 mA transmitter with unidirectional spans. These pressure transmitters incorporate a durable piezoresistive, silicon micro-machined sensing element to enable very low-pressure measurements. Integrated temperature...
The A/ASCS and A/ASCSX series current switches are available in a split-core with either Normally-Open (N/O) or Normally-Closed (N/C) output configurations. All of these sensors will have a solid-state output with an adjustable trip point (setpoint). These current switches are ideal for providing status information on any type of AC current...
The A/ACS and A/ACSX series current switches are available in a solid-core with either Normally-Open (N/O) or Normally-Closed (N/C) output configurations. All of these sensors will have a solid-state output with an adjustable trip point (setpoint). These current switches are ideal for providing status information on any type of AC current using...
ACI temperature transmitters are a cost effective solution for all of your temperature measurement needs. The transmitters are accurate, durable, and reliable. Numerous mounting configurations are offered. ACI produces two temperature transmitters, the A/TT100 for use with a 100 Ohm Platinum RTD and the A/TT1K for use with a 1K Ohm Platinum...
The A/10K-AN (Type III), A/10K-CP (Type II), A/3K, A/1.8K and A/20K Series temperature sensors are thermistor type sensors. These sensors provide a predictable output over a specified temperature range to meet each manufacturer’s required input values. (See web page for complete curve chart specifications) These units are offered in Room...
The A/SCS and A/SCSX series current switches are available in a split-core with either Normally-Open (N/O) or Normally-Closed (N/C) output configurations. All of these sensors will have a solid-state output with a fixed trip point (setpoint). These current switches are ideal for providing status information on any type of AC current using...
The A/100 and A/1K Series temperature sensors incorporate a Class A, Thin Film Platinum RTD sensor which conforms to DIN-IEC-751 platinum RTD standards. These sensors are available in either two or three-wire configurations, incorporating high accuracy and interchangeability throughout a wide operating temperature range. These units are offered...
The A/CS and A/CSX series current switches are available in a solid-core with either Normally-Open (N/O) or Normally-Closed (N/C) output configurations. All of these sensors will have a solid-state output with a fixed trip point (setpoint). These current switches are ideal for providing status information on any type of AC current using...
