Jump to Navigation

Belimo LM Series Direct Coupled Non-Spring Return Actuator, 45 in-lb Minimum Torque

Direct Coupled Non-Spring Return Actuator, 45 in-lb Minimum Torque
LM Series

Select a link under the "item" tab below to order.

Cat #Motor Drive (Default)24 VAC +/- 20%, 50/60 HZ, VDC +/- 10%VA Rating, Transformer SizingWattage Running (Holding)On/Off2-10 VDC (Default) 4-20 mA (w/500 Ω Resistor)On/Off1Floating PointStart and Span adj., Start 0.5 to 30 VDC, Span 2.5 to 32 VDCPWM adj., 0.02 to 50.0 SecondsFloating Point11 SPDT, 3 A (0.5 A inductive) @250V100 VAC to 240 VAC2-10 VDC (Default) Adjustable with MFT5 kΩ Resistive Feedback5 kΩ Resistive Feedback1S1A or S2APotentiometerEnclosure (Part No. +N4 or +N4H) with Terminal Strip
LMB24-39521.5 (0.2)
LMCB24-3352.51.5 (0.2)
LMB24-3.19521.5 (0.2)
LMB24-3-S9521.5 (0.2)
LMB24-3-T9521.5 (0.2)
LMCB24-3-T352.51.5 (0.2)
LMB24-3-T.19521.5 (0.2)
LMB24-3-P5-T9521.5 (0.2)
LMB24-3-P5-T.19521.5 (0.2)
LMB24-3-P10-T9521.5 (0.4)
LMB24-SR9531.5 (0.4)
LMCB24-SR3531.5 (0.4)
LMB24-SR.19531.5 (0.4)
LMB24-SR-T9531.5 (0.4)
LMCB24-SR-T3531.5 (0.4)
LMB24-SR-T.19531.5 (0.4)
LMB24-MFT15052.5 (1.2)
LMB24-HM9521.5 (0.2)
LMB24-10P-HM9521.5 (0.2)
Torque 45 in-lb [5 Nm] minimum
Angle of Rotation 95° (adjustable with
mechanical stops)
Fits Shaft Diameter ¼" to ¾" (self-centers on
5/8" shaft)
Position Indication reflective visual indicator
(snap-on)
Manual Override external push-button
Direction of Rotation external switch
Dimensions 6.57" x 2.6" x 2.34"
[167 x 66 x 59.4 mm]
Electrical Connection 3 ft, 18 GA plenum rated
cable, 1/2" conduit fitting
terminal strip (-T) models
Overload Protection electronic throughout
rotation
Auxiliary Switch(es) (-S) Models: 1 SPDT, 3A
(0.5A inductive) @ 250V
adjustable 5° to 85°
add-on: 1 or 2 SPDT, 3A
(0.5A inductive) @ 250V one
switch adjustable 5° to 85°
Housing NEMA 2/IP54 (NEMA 1/IP20
for -T models), Enclosure
Type2
Agency Listings cULus according to UL
60730-1A/-2-14, CAN/CSA
E60730-1:02, CE according
to 2004/108/EC and
2006/95/EC


Main menu 2