Jump to Navigation

Honeywell VBN2 Two-way Threaded Control Ball Valve

Two-way Threaded Control Ball Valve
VBN2

The VBN2 Two-Way Control Ball Valves control hot and chilled water with glycol solutions up to 50% in heating, ventilating, and air conditioning (HVAC) systems to provide two-position or modulating functions. These valve assemblies can be ordered with or without factory-mounted non-spring return or spring return direct-coupled actuators (DCA).

• Sizes from 1/2 inch to 2-1/2 inches with internal (female) NPT connections
• Equal percentage or linear flow characteristics
• Choice of four, factory-installed actuation control schemes: Floating, Modulating (2-10 V), Spring Return 2-Position, Spring Return Modulating/Floating
• Field configurable for normally open or normally closed fail-safe position
• Removable manual operating handle to control valve during installation or in an event of power failure
• ANSI Class IV seat leakage specification (0.01% of CV)
• Optional NEMA 3R (IP54) rated enclosure for outdoor applications
• Actuator can be mounted on the valve in any of four positions
• Sizes up to 3 inches
• Wide CV choices from 0.38 to 266
• Nickel-chrome plated brass or 316 stainless steel valve ball and stem

Select a link under the "item" tab below to order.

Table 1Table 2Table 3Table 4Table 5
XXXXXXXXXXXXXXXX
Table 1Ball Valve
VBNVBN
Table 2Valve Type
2Two-way type
Table 3Valve Size
A1/2” NPT (DN15)
B 3/4” NPT (DN20)
C1” NPT (DN25)
D1-1/4” NPT (DN32)
E1-1/2” NPT (DN40)
F2” NPT (DN50)
G2-1/2” NPT (DN65)
H3” NPT (DN80), (two-way only)
Table 4Cv Letter Code Designation
See Chart for available option
Table 5Actuator Selection
ANon-spring return, floating actuator (MN6105A1011)
BNon-spring return, modulating actuator (MN7505A2001)
CSpring return, 24V, two-position actuator (MS8105A1008)
DSpring return, modulating/floating actuator (MS7505A2008)
XNo actuator
Valve Type: Control Ball Valve
Body Pattern: Two-way
Connection Type: NPT Female
Controlled Medium: Hot Water
Chilled Water with up to 50% Glycol
Leakage rate (%): ANSI Class IV
Maximum Safe Operating Pressure: 360 psi (2482 kPa)
Fluid Temperature Range: -22 F to +250 F (-30 C to +121 F)
Materials:
Body: Brass
Stem: Brass
Seat: Teflon™ seals with EPDM O-rings
Plug/Ball/Disc: Nickel-plated brass ball


Main menu 2

about seo